Добро пожаловать на SKY-FRAUD.RU, после регистрации , вам будут доступны все разделы форума.
Вернуться   SKY-FRAUD.RU > Основное общение > Реальный кардинг > Статьи > How to make great fake ID
Adv. info:
Важная информация
Основные домены форума: SKY-FRAUD.RU | S-FRAUD.RU

TOR: bcbm4y7yusdxthg3.onion

XMPP.NAME - Официальный Jabber сервер для участников SKY-FRAUD.RU
Статьи Полезная информация

UAS section 1
INSTOCK Section 2
Advert 3
Опции темы Опции просмотра
Старый 29.08.2013, 21:53   #1
Аватар для SkyNet
SkyNet вне форума
Регистрация: 01.01.2013
Сообщений: 10,038
Отправить сообщение для SkyNet с помощью ICQ
Exclamation How to make great fake ID

1. Obtain necessary supplies from one of the following websites:
[Для просмотра данной ссылки нужно зарегистрироваться]
[Для просмотра данной ссылки нужно зарегистрироваться]
[Для просмотра данной ссылки нужно зарегистрироваться]
2. Find and edit the templates
Search a Peer-2-Peer network such as Kazaa, LimeWire or BitTorrent to find a template. By using Adobe Photoshop or Macromedia Fireworks, or a free program like GIMP, you should easily be able to edit the templates.
3. You should begin editing by changing the text fields. Most standard IDs use the font Arial that comes with Windows but if you wish to use specialty fonts that do not come with Windows (such as a font for signatures) you can see how to download and install them by reading this article: Install Fonts On Your PC.

Edit the eye and hair color fields as follows:
Eye Color- Indicate eye color abbreviation:
BLK - Black
GRY - Gray
MAR - Maroon
BLU - Blue
GRN – Green
PNK - Pink
BRO – Brown
HAZ - Hazel
MUL – Multicolor

Hair Color- Indicate hair color abbreviation:
BAL – Bald
BRO – Brown
SDY - Sandy
BLK - Black
GRY - Gray
WHI - White
BLN – Blonde
RED – Red

Also, if your ID has restrictions or endorsements here are the codes. Some are rarely used but others, like restriction code B are quite common. Here are a list of some of the more popular codes:

Restriction codes:
A - No Restriction
B - Corrective Lens
C - Mechanical Aids
D - Business Only
G - Daylight Only
H - Employer's Vehicle Only
J - Prosthetic Aid
Q - No Passengers
R - motorcycles 500 cc & under
S - to & From School
T - To & From Medical
U - all motorcycles except Class X
2 - Personal Vehicles Only

Endorsement codes are less common but include:
M - Motorcycle endorsement for any motorcycle regardless of engine displacement.
P - Passenger vehicles designed to carry 16 or more persons, including the driver.
T - Double/triple trailers allowed.
Y - Farm endorsement (Class A).
4. Then, scan in the photo and signature image files
You need to scan in a passport photo or other acceptable ID picture. Also scan in a signature. If the background of the passport photo does not match the background of the state id, you will need to do some editing.
5. After scanning the passport photo into the computer, the person's face will need to be separated from the background so it flows seamlessly with your ID card template. Using a program such as Adobe Photoshop, Macromedia Fireworks, or GIMP, provides you with an image editing tool called "Magic Wand". This tool will allow you to click a color in the image and it will select all surrounding colors that are similar or the same. There will be a slider that will allow you to select the amount of variance from the color you select. The higher the variance relates to more of the image that will be selected. Once the background is nearly fully selected without containing any of the person's face, press 'Delete' on your keyboard to erase it. You can then magnify the image and use the eraser tool to clean up around the person's face. At this point, zoom out and copy the image. It can be pasted onto your ID card template. It will then flow seamlessly into your template design and you can choose any background color you want!
For more detailed instructions on how to edit facial images for use on id cards, see this article: Edit Face Images for Use on a Fake ID.
6. Then, add a Barcode
The unusual-looking scrambled barcode on the back of most driver’s licenses is known as a PDF417 barcode. This barcode contains most of the information contained on the front of the license. By editing this readout, you can encode your information into this barcode. You can generate these barcodes by finding a free PDF417 Generator online. Below is the general sequence.

ANSI 6360263f02DL20393504EM02460010DLDAQ1414556
7. Add a Magnetic Stripe
If your license requires a magnetic stripe and you want it to be scannable, it can be encoded with an encoder. Generally these are very expensive and are difficult to find. However, you can get the EasyIDea Magnetic Stripe Encoder for less than $400 bucks. There are two types of magnetic stripes, HiCo and LoCo. HiCo and LoCo magnetic differ in that HiCo are much more difficult to demagnetize. The encoders for these typically were much more expensive than for LoCo. Most HiCo encoders encode LoCo stripes as well. The best way to program the stripe is to decode a working driver’s license, edit the data, and then program it back onto the stripe. Encode the magnetic stripe after the card is finished.
8. After editing is done, you can start printing
You will need to print on a synthetic paper. There are two types of synthetic paper that are nearly the same. Teslin and Artisyn paper are single layer, silica-filled, polyolefin printing substrate with unique microporous and temperature resistance features that make it the product of choice for laminated ID badges. Teslin is more expensive than Artisyn and much less versatile. If you want to use a desktop inkjet printer, you will achieve better results with Artisyn or Artisyn NanoExtreme™ synthetic paper. Printing on Teslin with an inkjet does not work well and tends to look grainy and smear. The Artisyn and Artisyn NanoExtreme™ are coated with chemicals to absorb the ink effectively. It is cheaper than Teslin, works well with all types of printers including inkjet and laser printers. It also tends to produce better print quality results. Teslin can be found at and Artisyn can be found at Arcadia also sells perforated sheets that punch out in the size of the ID cards.
9. The next step is to select your printer. The preferred method is to use a pigmented based inkjet printer like an Epson printer with DuraBrite ink. This tends to produce incredible results and works well with Teslin even though it is not a laser printer. Better results are still achieved on Artisyn paper, and for the highest quality results Artisyn NanoExtreme™ should be used. If a pigmented ink printer is not available, a laser printer is still a good result. Laser printers produce sharp and clear results, but the ink tends to look waxy. Lastly, any dye-based inkjet printer will work fine. A dye-based inkjet printer is that standard color printer that most people have in their home. Again, if you use dye-based inks make sure to use Artisyn. You should print on highest quality photo settings.

Print on one sheet of paper, both front and back.
10. Then, the next step is cutting.
If you are using EasyIDea Microperforated Artisyn, you can skip this tedious step. Otherwise, start by cutting out the ID from the paper. Tracing the dimensions of the ID using a butterfly pouch is generally helpful. A paper cutter or X-Acto knife is also helpful. After cutting sheets by hand for a while, I decided I’d rather use the punch-outs from [Для просмотра данной ссылки нужно зарегистрироваться]
11. Then you will need to laminate.
You must use thermal laminating in order to bond the butterfly pouch to the synthetic paper. Once laminated, the card will harden and resemble a PVC card. You must use a thermal (heat) pouch laminator. Avery, Arcadia EasyIDea, or GBC makes good ones that run around $50. If you can't afford a laminator then you can use a standard home iron. This is a little more tricky as you have to make sure the iron doesn't get so hot that it melts the laminate plastic but is still hot enough to bond the laminate to your ID. Also be sure the iron does not have any water loaded into it as this could damage the ink on the pre-laminated ID and the steam could warp the ID card.
12. Next, place the insert into the butterfly pouch. You must place the card into a carrier. Run the carrier through the laminator. Immediately following lamination, it is helpful to place the card under something flat like a book so that it cools flat.
13. Then, apply a hologram.
Generally, it is acceptable to use a generic hologram. Very few people actually examine the hologram and read what it says on it. I have had my fake for over two years with a generic hologram on it and I have never had a problem. If you’re concerned about making something that looks truly authentic, there are other methods to replicate holograms. The Shield and Key hologram is the most commonly used generic hologram and is a transparent rainbow hologram. This means that it looks transparent when looked at directly but when tilted to the sides the hologram lets off a rainbow spectrum. This is my generic hologram of choice when making fakes. This type of hologram is pretty much impossible to duplicate using the Pearl-Ex method below.
14. Making a Hologram
The gold holograms on many ID cards are called binary holograms. These holograms can be easily reproduced using Pearl-Ex paint and Photo-EZ paper.

This product is for making stencils. A stencil is basically the outline of a picture with the negative part missing. To make the stencil you scan the hologram off your id, then convert it to an all black image. Next you print the image on a transparency. A transparency is a transparent sheet of plastic meant for inkjet printers or lasers. Then you take the transparency and tape it to the Photo-EZ. You put it out in the sun and all the areas of the material not covered by the black negative of the holo cures. When washed the part covered by the negative washes away, leaving you with your stencil. You will want to order the high resolution material. This product can be ordered from cBridgeand more information can be found there.

As for the painting material, the two main ones are Interference Gold (Fine) made by Golden Acrylics and PERL-EX DUOTONE. The latter of the materials work best because of the fact it reflects two colors of the spectrum. Perl-Ex comes as a powder and preparation is needed. These paints are transparent when viewed from straight on. When viewed from different angles you see different colors depending on the particular colors of the paint. Perl-Ex comes in Duo Red-Blue, Duo Blue-Green, and Duo Green-Yellow. Perl-Ex is available in a lot of places here is one: [Для просмотра данной ссылки нужно зарегистрироваться]

You have to buy a Transparent Base made for paints to prepare the Perl-Ex. A good one is Speedball Transparent Base. You mix in a 1:50 ratio. 1 part Per- 50 parts base. If you are using Golden acrylics then you use a 5:1 ratio. 5 parts paint 1 part base. When applying the paint in the stencil, you should use if possible one of those brushes made for screen printing. It is like a pencil but with a flexible tip. A sponge can be used but extra care needs to be taken when applying. You want to apply a very thin amount and practice will be needed to get it right.

On a lot of the new ID's there is a multicolored hologram that reflects the full spectrum (like a rainbow). This is especially true of most of the Canadian ids. What you do is pick the two most dominant colors and buy the matching Perl Ex colors. This will be good enough to reproduce the holo. The holo can be put directly on the finished ID or before lamination on the inside of the pouch. If you choice is the inside then remember to put it in the reverse.
15. Then, you’re ready for the finishing touches.
It is recommended that you sand the edges of the hologram with a very fine grit sandpaper. This removes the jagged edges of the synthetic paper. You should lightly sand the front and back of the id to give it a more worn look.
16. Lastly, these instructions were to make a 30 mil drivers license that resembles a PVC card. If you want to make something thinner that bends corner to corner like some ID cards, you can remove the front part of the butterfly pouch and simply laminate the back of the pouch with the synthetic paper. Many machines use this method, but it can be accomplished manually. You can also replicate signature strips by scratching the surface of the butterfly pouch with sandpaper.
17. Have fun and don’t be an idiot with your ID.
Ответить с цитированием

Advertising \ Реклама

HQ DUMPS by Donald Trump
Ссылки для доступа к сервису: TRUMP-DMPS.RU

Sell RDP/Продажа дедиков/RDP SHOP #1
Ссылки для доступа к сервису: UAS-SERVICE.RU \ UAS-SERVICE.SU

HQ DUMPS by Donal Trump
Ссылки для доступа к сервису: TRUMP-DMPS.RU

Sell RDP/Продажа дедиков/RDP SHOP #1
Ссылки для доступа к сервису: UAS-SERVICE.RU \ UAS-SERVICE.SU

HQ DUMPS by Donal Trump
Ссылки для доступа к сервису: TRUMP-DMPS.RU

Старый 19.03.2014, 20:12   #2
Junior Member
Аватар для Cyb3rSmok3
Cyb3rSmok3 вне форума
Регистрация: 19.11.2013
Сообщений: 16
По умолчанию

Links are dead bruh... try update it for us/me if possible
Ответить с цитированием
Старый 28.07.2020, 23:54   #3
Junior Member
Аватар для 6UHWu5LqKkzby2k
6UHWu5LqKkzby2k вне форума
Регистрация: 09.05.2019
Сообщений: 5
По умолчанию

Good Read, but if you could update the links that would be good.

Adding to my archive though!

Ответить с цитированием
Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
Опции темы
Опции просмотра
Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
fake id usa cutie Реальный кардинг 0 15.02.2015 18:16
Krebs got fake cash SkyNet Mass media about us 0 07.09.2014 22:34
Using Fake Jobs for Social Engineering SkyNet Статьи 0 30.08.2013 14:18
Make up ur mind and make money..$$$ SkyNet Статьи 0 29.08.2013 21:41